Software Update v1.2.1 is now available

[Davy]

PicoPix Max Tips/Tricks/Hacks/Mods

Or for future reference, you can boot into the stock recovery (for factory reset) as follows: turn the projector completely off (e.g. long-hold the power button) make sure there is nothing in the USB-A port insert a pin into the ‘recovery’ pinhole. Two pinholes are one the side of the PPM; recovery is the one closest to the usb-c port (the other is a hard reset) while pressing the button inside this pinhole, power on the projector with the power button. Release the power button, then release t…